Find help with tiling and waterproofing around Pakenham.

Tile removal and surface preparation

Plan removal of old tiles and preparation of floors and walls before retiling in Pakenham: hidden damage, flatness, sheeting and waste.

Tile removal and surface preparation

Illustrative image, not a completed customer project.

New tiles are only as good as the surface under them. Removing old tiles can expose cracked screeds, damaged wall sheeting, failed waterproofing or water damage. Treat demolition and preparation as their own quote items, so you can see what each tiler has allowed for before comparing totals.

Send a tile removal and retiling enquiry with the rooms, what is there now and what you plan to install. Up to three independent local businesses receive it and decide whether they can help. This site is a referral service only. It does not remove tiles, prepare surfaces or lay tiles.

Removing tiles: what is involved

Taking up old tiles is heavy, noisy and dusty work. What comes off depends on how the tiles were laid.

Surface What removal can involve
Floor tiles on a slab Breaking up tiles, removing adhesive or mortar bed, grinding the slab
Floor tiles on timber sheeting Lifting tiles and possibly the sheeting, checking joists
Wall tiles on plasterboard or fibre cement Tiles often pull the sheet face with them; sheeting may need replacing
Wall tiles on rendered masonry Chipping tiles off; render may crack or come away
Tiles over older tiles Two layers to remove, more weight and waste

Ask each business whether it will remove the tiles, the adhesive or bedding, and the substrate behind wall tiles, and whether the price includes disposal.

Older homes and suspect materials

In homes built or renovated before 1990, some wall sheeting, floor underlays, vinyl beneath tiles and older adhesives may contain asbestos. Fibre cement sheeting in older bathrooms and laundries is a common example. You cannot tell by looking.

Before any demolition:

  • Tell the business the age of the house and what you know about past renovations.
  • Do not break, drill or cut old sheeting or underlays yourself.
  • Ask how the business handles suspect material and whether it arranges testing.
  • Check WorkSafe Victoria guidance on asbestos in homes before work starts.

If asbestos is confirmed, removal may need a licensed asbestos removalist. Ask whether the tiler arranges that or whether you need to.

What removal can reveal

The real condition of a floor or wall is often unknown until the tiles are off. Common findings include:

  1. Water damage to timber floors, wall framing or sheeting behind a shower.
  2. Failed or missing waterproofing.
  3. Cracks in the slab or screed.
  4. Uneven or out-of-plumb walls.
  5. Old patches and repairs.
  6. Rot or termite damage in timber framing.

Ask each business how it will tell you about a finding like this before continuing. A photo, a short description and a written price for the extra work, approved before it starts, keeps the job clear. Agree who can approve changes if you are not there.

If water damage is found behind a shower, our shower leak assessment page explains how the cause should be investigated, and our tile failure guide covers what failed tiles can tell you.

Floor preparation

Tiles need a base that is clean, sound, flat and suitable for the adhesive. The flatness needed depends on the tile size: large format tiles need a flatter floor than small tiles. Preparation can include:

  • Grinding off old adhesive or high spots.
  • Filling cracks and hollows.
  • Applying a levelling compound.
  • Priming the surface.
  • Replacing damaged timber sheeting.
  • Installing a crack isolation or uncoupling membrane where the tiler recommends it.

Ask which of these the tiler expects to do and how it will check flatness. The adhesive and tile manufacturers set the base requirements for their products. Our tile layout planning page explains how tile size affects this.

Wall preparation

Walls being retiled may need new sheeting, especially in wet areas. In a shower, the wall sheeting, waterproofing and tiles work as a system. If the sheeting is damaged, it usually needs replacing before new waterproofing goes on.

Points to discuss:

Question Why it matters
Will the old sheeting stay or be replaced? Old damaged sheet cannot support new tiles reliably
Are the walls straight and plumb? Uneven walls show with large tiles
Are there pipes, wiring or fittings to move? Needs a plumber or electrician before sheeting
Where do niches and grab rail supports go? Framing must be added before sheeting

Sheeting, framing and plumbing changes may be done by other trades. Agree who does each step and in what order. Our wet area sequencing guide sets out a typical order.

Waterproofing after removal

In bathrooms, laundries and other wet areas, removing tiles usually damages or removes the waterproofing underneath. New waterproofing is then needed before retiling. Waterproofing of domestic wet areas is covered by AS 3740 and by Victorian building requirements. The Building and Plumbing Commission (BPC) describes waterproofing as a distinct class of domestic building work. Ask each business who will do the waterproofing and what documents they will provide. Our wet area waterproofing page covers this.

Uncoupling and crack isolation membranes

On slabs with cracks, timber floors, or where large tiles are laid over a mixed base, a tiler may recommend a membrane between the base and the tiles. Uncoupling membranes allow the base and the tiles to move slightly independently, which can reduce cracking. Crack isolation membranes bridge small cracks in the base. They are not substitutes for wet area waterproofing unless the product is part of an approved waterproofing system.

Ask the tiler why it recommends a membrane, which product, and whether it is compatible with the adhesive and tiles. It adds height to the floor, which can affect doors and junctions with other floors.

Tiling over existing tiles

Laying new tiles over old ones can avoid demolition. It is not suitable in every case. The old tiles must be well bonded, flat and sound, and the extra height must work with doors, fixtures and floor wastes. In wet areas, tiling over old tiles does not renew the waterproofing underneath.

Ask the tiler:

  • Have you tested the old tiles for hollow spots?
  • What primer or adhesive is needed to bond to the old tile surface?
  • How will doors, skirting and fixtures be affected by the extra height?
  • Will the floor waste and shower base still work?

Our tile repairs page explains how hollow tiles are found.

Timber floors under tiles

Bathrooms and laundries in older homes are often on timber floors. Tiling over timber needs a stiff floor, suitable sheeting and fixings. A floor that flexes will crack tiles and grout. If water has damaged the floor under a shower or toilet, the sheeting and sometimes the joists need replacing. That may be work for a carpenter or builder before the tiler starts.

Ask the business whether it will check under the house, if there is access, and how it will deal with any timber repairs.

Walls that are out of plumb

Walls in older homes are often not perfectly straight or vertical. Small tiles hide this better. Large tiles show it, with tapering grout lines and uneven edges. Preparation can include packing out framing before sheeting, or using a render to straighten masonry walls. Ask the tiler how it will deal with uneven walls for the tile size you have chosen.

Dust, noise and protection

Tile removal is one of the dustiest jobs in a renovation. Ask how the business will:

  • Contain dust, for example by sealing doorways with plastic.
  • Use dust extraction on grinders and saws.
  • Protect floors along the route to the skip or trailer.
  • Protect fixtures, cabinets and other surfaces that stay.
  • Handle noise if you have neighbours close by.

If you are living in the home, plan for the affected rooms being unusable for some days. A bathroom being retiled may be out of action for longer than expected if hidden damage is found.

Living in the house during demolition

If the bathroom being stripped is the only one, plan where the household will shower and use a toilet. Demolition dust can travel through the house, especially through ducted heating returns, so ask whether the system should be turned off. Keep pets and children away from the work area and the skip. Ask the business for a rough timeline so you know how long the room will be out of use, and allow extra time in case hidden damage is found.

Waste and skips

Tile, mortar and sheeting waste is heavy. A bathroom strip-out can fill a small skip. Ask whether disposal is included, who arranges the skip and where it will go. If the skip needs to sit on the road or nature strip, check with Cardinia Shire Council about any permit.

Comparing removal and preparation quotes

Quotes differ most in this area because each business allows for different conditions. Compare:

  1. Which surfaces and rooms are included.
  2. Whether adhesive or mortar removal and grinding are included.
  3. Whether wall sheeting replacement is included.
  4. Levelling and priming, by room.
  5. Waste disposal.
  6. How hidden damage is priced and approved.
  7. Asbestos testing and removal arrangements.

Our tiling quote checklist has a full comparison table.

Sending your enquiry

Use the enquiry form and include the rooms, the current tiles and surfaces, the age of the house, any known leaks or damage and the tiles you plan to use. Photos of the room from a distance help.

Yes Right Pty Ltd operates this referral service and may receive a fee from businesses it introduces. It does not demolish, prepare or tile. The business you choose confirms the scope, waste arrangements and price directly with you. For local notes see tiling in Officer.

Send an enquiry