Tile layout planning
Work out tile size, starting lines, cuts, falls and feature details with a tiler before tiles are ordered for a Pakenham home.
Illustrative image, not a completed customer project.
The layout decides how a tiled room looks more than the tile itself does. Where the first tile sits, how cuts fall at walls and doorways, and how the pattern meets fixtures are all set before the first bag of adhesive is opened. Agree the layout with the tiler before ordering, not on the morning work starts.
Send a tiling enquiry with the room, the tiles you are considering and any drawings you have. It is passed to up to three independent local tilers, who decide whether they can help and quote directly. This website is a referral service. It does not design layouts, supply tiles or do tiling work.
What a layout plan covers
A layout plan does not need to be a formal drawing. For most homes it is an agreed set of decisions, written down or marked on a sketch. The main items are:
- Tile size and orientation in each area.
- The starting point or centre line for the pattern.
- The size of cut tiles at walls, doorways and fixtures.
- Grout joint width and colour.
- How the floor pattern lines up with the walls.
- Feature tiles, niches, borders and stripes.
- Edge trims on external corners and exposed edges.
- In wet areas, how the tiles work with the floor falls and the waste.
Ask each tiler how it sets out a room and whether it will show you the proposed layout before starting. A tiler that marks out the floor or wall and walks you through it gives you a chance to change something while it is still cheap to change.
Tile size and the room
Large tiles are popular, but they are not always the best choice for every room. A big tile in a small bathroom can leave narrow slivers at walls, and on a floor with falls to a waste, large tiles may need extra cuts to follow the slope. Small tiles and mosaics follow falls more easily but have more grout lines to clean.
| Tile size | Points to discuss |
|---|---|
| Mosaic and small format | Follows falls and curves well; more grout; often used on shower floors |
| Medium format | Flexible for most rooms; fewer visible cuts in small spaces |
| Large format | Fewer grout lines; needs a very flat base and careful handling; cuts at falls and edges |
| Long plank tiles | Timber look; can show lippage (uneven edges) if the base or tile is not flat |
Large and long tiles need a flatter base and often a different adhesive method. Ask the tiler what preparation the chosen size needs and whether it changes the price. Our tile removal and preparation page covers base work.
Where cuts land
Most rooms are not exact multiples of a tile size, so some tiles need cutting. Good set-out puts cuts where they are least visible, keeps them a sensible size and balances them on opposite sides of a room or wall. A thin strip of tile at a doorway or along the most visible wall is the most common layout complaint.
Ask the tiler:
- Where will the pattern start?
- How big will the cuts be at each wall and doorway?
- How will the pattern meet the shower, bath, vanity and toilet?
- Will wall tiles line up with floor tiles?
- What happens around windows, niches and corners?
A sketch with dimensions answers these quickly. If the answer is “we’ll work it out on the day”, ask for the main decisions to be agreed in advance anyway.
Falls and floor wastes
In a bathroom, shower or laundry, the floor usually slopes toward a floor waste so water drains away. The layout must work with that slope. Large tiles do not bend, so a tiler may need to cut them diagonally toward the waste, use a linear drain, or choose a smaller tile for the shower floor.
Ask how the tile layout and the falls will work together, and who is responsible for forming the falls in the base. Falls are usually formed before waterproofing, so they may be another trade’s job. The waterproofing standard for domestic wet areas is AS 3740. Ask the businesses involved how their work meets it; this website does not state its requirements. Our wet area waterproofing page and our wet area sequencing guide explain how these stages fit together.
Grout joints and colour
Grout joint width depends on the tile, the edge type and the manufacturer’s recommendations. Rectified tiles, which have precisely cut edges, are often laid with narrower joints than tiles with natural edges. Very narrow joints need a flatter base and very consistent tiles.
Grout colour changes the look. A grout close to the tile colour makes the surface look more even. A contrasting grout shows the pattern and every slight irregularity. Ask to see the grout colour against the tile before deciding, and agree it in writing.
Patterns
Tiles can be laid in many patterns. Each one changes the amount of cutting and waste.
| Pattern | What to know |
|---|---|
| Straight lay (stack bond) | Simplest; joints line up in both directions |
| Brick bond or offset | Common for rectangular tiles; offset distance matters for long tiles |
| Herringbone and chevron | More cutting and time; strong visual effect |
| Diagonal | More cuts at every wall |
| Vertical stack on walls | Clean modern look; needs careful set-out |
Long rectangular tiles laid with a half offset can show uneven edges because many tiles have a slight bow. Manufacturers often recommend a smaller offset, such as a third. Ask the tiler what the manufacturer of your tile recommends.
Feature tiles, niches and borders
Feature walls, shower niches, borders and stripes look best when they line up with the main tile grid. A niche set at an awkward height or position can force odd cuts around it. Decide the niche position with the tiler and the person framing the wall before the wall is sheeted, so it can be built to suit the tile size.
If you want a feature tile to run in a particular place, say so early and mark it on the plan.
Edges, trims and corners
Exposed tile edges and external corners can be finished with trims, mitred tile edges or bullnose tiles. Each gives a different look and cost. Ask the tiler which it proposes for:
- Window reveals.
- Niche edges.
- Ends of half-height tiled walls.
- Splashback edges.
- Shower hob or step edges.
- Floor junctions with carpet or timber.
Agree the trim material and colour. A chrome trim, a black trim and a mitred edge make very different finishes.
Lippage and flatness
Lippage is the term for tile edges sitting at different heights next to each other. Some lippage is normal with tiles that have a natural bow, especially long rectangular tiles. Too much looks untidy and can catch feet. It shows most with low-angle light from windows or along hallways.
To reduce lippage, the base must be flat, the tiles should be laid with the offset the manufacturer recommends, and many tilers use levelling clips during installation. Ask the tiler how it controls lippage and what result to expect with the chosen tile.
Wall tiles and fixtures
On bathroom walls, the position of tapware, shower roses, towel rails and niches should line up with the tile grid if possible. A tap that sits in the middle of a tile looks neater than one cut across a grout joint at an awkward point. That needs coordination between the plumber and tiler before the plumber sets the rough-in positions.
Ask:
- Will the tiler mark out the wall before the plumber sets the tap positions?
- Where will the first full tile start above the floor or bath?
- How will the tiles finish at the ceiling or at a half-height line?
Mixing floor and wall tiles
Using the same tile on floor and walls gives a continuous look. Using different tiles gives contrast. Either way, decide whether grout lines should run from the floor up the wall. Aligning them looks tidy but needs both tiles to have compatible sizes. Ask the tiler whether your choices allow it.
Doorways and thresholds
The layout at the doorway is the first thing people see. A full tile or a balanced cut at the doorway looks better than a thin sliver. In bathrooms, the threshold also needs a detail that keeps water inside the wet area. Ask how the tiler will finish the doorway and how the tiled floor will meet the floor in the next room.
Ordering quantity and batches
Once the layout is agreed, the tiler can calculate how many tiles are needed, including waste for cuts and breakages. Patterns such as herringbone need more. Ask the tiler to calculate the quantity, and buy all tiles from the same batch, as colour can vary between batches.
Keep some spare tiles after the job for future repairs. Our tile repairs page explains why matching tiles later can be difficult.
Layout in different rooms
Each room type raises its own layout questions. Our pages on bathroom tiling, kitchen splashbacks, laundry tiling and floor and wall tiling cover these in more detail. Our tile selection guide helps with choosing tiles to suit the room.
Agreeing the layout in the quote
A quote that names the tile but not the layout leaves room for disagreement. Ask each tiler to state:
- The tile and size in each area.
- The pattern and offset.
- The starting point or centre lines.
- Grout joint width and colour.
- Trims and edge details.
- Niche, feature and border positions.
- Who forms the falls in wet areas.
Our tiling quote checklist has a full comparison list.
Sending your enquiry
Use the enquiry form and include the room, its rough dimensions, the tiles you are considering and any photos or plans. If the work is part of a renovation, say which other trades are involved.
This site is run by Yes Right Pty Ltd as a referral service and may receive a fee from tilers it introduces. It does not set out, supply or lay tiles. The tiler you choose confirms the layout, price and timing with you directly. See our Pakenham area page for local notes.