Find help with tiling and waterproofing around Pakenham.

When tiles crack, lift or leak

Recording cracked, drummy, lifting or leaking tiles at a Pakenham 3810 home before repair.

When tiles crack, lift or leak

Illustrative image, not a completed customer project.

Tiles fail for a reason. A crack, a hollow sound, a lifted ridge or a damp patch is evidence of what is happening underneath, and that evidence can be lost if the area is patched before anyone looks at it properly. This guide explains how to record what you see and what to ask the business that assesses it.

It is general information for homeowners around Pakenham and nearby. It does not diagnose your tiles. A business that inspects the area should explain what it thinks the cause is. To arrange that, send a tile repair enquiry and up to three independent local businesses can respond.

Is it urgent?

Some tile failures need quick action, while others can be monitored.

Situation Response
Tiles suddenly lifting in a ridge (tenting) Keep people away; tiles can crack or pop up; arrange an assessment soon
Water leaking into another room, ceiling below or wall cavity Stop using the shower or fixture; arrange a plumber or leak assessment
Loose wall tiles in a shower Stop using the shower if water may be getting behind; arrange assessment
A single cracked floor tile Usually not urgent; record it and arrange a repair
Some hollow-sounding tiles with no cracks Monitor and record; ask for an assessment if it spreads
Crumbling grout in a dry area Maintenance; arrange regrouting when convenient

If there is an electrical hazard, such as water near power points or lights, keep clear and contact an electrician. If there is immediate danger, contact the appropriate emergency service.

How should you record what you see?

A clear record helps the assessing business and protects you if a warranty or insurance claim follows.

  1. Take photos of the whole room and close-ups of the damage, with something for scale.
  2. Note the date you first noticed the problem.
  3. Note whether it is getting worse, and take photos at intervals.
  4. Record any events that might be linked, such as a dropped object, heavy rain, a hot spell, plumbing work or a new appliance.
  5. Note any stains, smells, swelling of cabinetry or door frames, or mould nearby.
  6. Do not remove tiles, grout or sealant to look underneath.

Tapping tiles lightly with a coin to map hollow areas is fine, and marking the hollow area on a sketch or photo is useful.

Common patterns and what they may suggest

These patterns help you describe the problem. They are not a diagnosis.

Why do tiles tent or lift?

Tiles can rise in a ridge when the tiled area has no room to move. Tiled floors expand and contract with temperature and the building moves slightly over time. Movement joints filled with flexible sealant at walls, at intervals across large floors and at changes in the structure allow for this. If those joints were left out or filled with grout, the pressure can build until tiles lift. Hot weather and direct sun often trigger tenting.

Why does a crack run through a line of tiles?

A straight crack running through several tiles often follows a crack or a joint in the slab or screed underneath. The slab moves, and the tiles crack with it. A business may recommend a movement joint or a crack isolation membrane at that point, and if the crack is wide or growing, a builder or engineer may need to look at the slab.

Hollow or drummy tiles

Hollow tiles have lost or never had full contact with the adhesive. Causes can include poor adhesive coverage during laying, a dusty or unsuitable surface, movement, or water weakening the bond. Scattered hollow tiles over a large area can point to a problem with the original laying.

Cracked single tiles

A single cracked tile is often impact damage from a dropped object. It can also be a void under that tile. Tapping the tiles around it helps show whether the problem is limited to one tile.

Wet area failures

In showers and bathrooms, failed grout, cracked tiles and loose wall tiles can let water past the tiles. If the waterproofing behind is damaged or missing, water can reach wall framing, floor sheeting and nearby rooms. Signs include stains on walls outside the shower, swelling at the bottom of a vanity or door frame, mould on skirting, and musty smells. Our shower leak assessment page explains how leaks are investigated.

Grout that keeps cracking

Grout that cracks again soon after regrouting is often a sign of movement. Common places are internal corners, where floors meet walls, and along lines over the slab joints. These joints usually need a flexible sealant rather than grout. If grout cracks across a floor in a pattern, the base may be moving.

Efflorescence and white deposits

White powdery deposits on grout or tile edges, called efflorescence, come from salts carried to the surface by water. It is common outdoors and on new work as it dries. Ongoing efflorescence indoors can mean water is moving through the base. Note where it appears and whether it returns after cleaning.

Checking nearby rooms and under the house

Water from a failed wet area often shows up somewhere else first. Check:

  • The wall on the other side of the shower.
  • Skirting boards and floor coverings next to the bathroom.
  • Cupboards and vanity bases for swelling.
  • Ceilings below an upstairs bathroom.
  • Under the house below the bathroom, if there is safe access.

Note anything you find and include it in your enquiry. Do not crawl under a house if it is unsafe or there is a risk from old materials.

Seasonal and weather patterns

Some failures follow the weather. Tiles that lift in a hot spell point to movement. Damp that appears only after heavy rain may come from outside rather than from a shower. A leak that appears only when a particular fixture is used points to that fixture. Recording when the problem appears helps the business narrow down the cause.

What to ask the assessing business

When a business inspects the tiles, ask:

  • What do you think the cause is, and why?
  • What would you need to check to confirm it?
  • Does the cause need fixing before the tiles are repaired?
  • Is the problem likely to spread?
  • What are the repair options and their limits?
  • Can matching tiles be found?

Ask for the findings in writing with photos. If the business recommends another trade, such as a plumber, builder or engineer, ask what it expects them to check.

Warranty, builder and insurance questions

If the tiling is recent, contact the business that did the work first. If the home is new and under a builder’s warranty, contact the builder before arranging repairs. Paying another business to fix a defect may complicate a claim.

If water damage is involved, check your home insurance policy. Many policies treat sudden escape of water differently from gradual leaks. Talk to the insurer before demolition if you plan to claim, and keep your records.

The Building and Plumbing Commission and Domestic Building Dispute Resolution Victoria have information about defects and disputes in domestic building work.

Rental properties

If you rent your home and notice cracked, lifting or leaking tiles, tell your landlord or property manager in writing, with photos, as soon as you can. Leaks can get worse quickly and may be urgent repairs under Victorian tenancy rules. Consumer Affairs Victoria explains what counts as an urgent repair. Landlords should arrange an assessment before the damage spreads, and keep the record of what was found.

Tests a business may suggest

Depending on what it sees, a business may suggest further checks. These can include tapping and mapping hollow tiles, moisture readings on nearby walls and floors, isolating the shower screen, waste or tapware to see which one leaks, or lifting a test tile. Some checks are done by a plumber or a specialist leak detection business. Ask what each check will show, who does it and whether it is charged separately.

Temporary measures while you wait

Until the area is assessed, a few simple steps can limit damage without destroying evidence:

  • Stop using a leaking shower and use another bathroom if you have one.
  • Put a mat or tape over sharp tile edges.
  • Keep people off tenting tiles.
  • Wipe up water and ventilate the room.
  • Do not regrout, seal or remove tiles before the assessment.

If water is reaching electrical fittings, turn off power to that circuit at the switchboard if it is safe to do so, and call an electrician.

Repair or retile

Once the cause is understood, the business can recommend a repair. Options range from replacing a few tiles to lifting and relaying a whole area, adding movement joints, or retiling a wet area after new waterproofing. Our tile repairs page covers repair options, and our tile removal and preparation page covers retiling.

Preventing repeat failures

When the area is retiled, ask how the new work will avoid the same failure. For example:

  • Movement joints in the right places.
  • A suitable base and adhesive method for the tile size.
  • Waterproofing to AS 3740 in wet areas, with records.
  • Correct falls to the waste.
  • A crack isolation membrane where the slab has cracked.

Our tiling handover guide explains what to check and keep when the new work is finished.

Sending your enquiry

Use the enquiry form and include photos, the room, what you have seen, when it started and whether it is getting worse. Mention any leaks, stains or smells.

Yes Right Pty Ltd operates this referral website and may receive a fee from businesses it introduces. It does not inspect, diagnose or repair. The business you choose gives its own assessment and quote. See also tiling in Pakenham Upper.

Send an enquiry