Choosing tiles for each room
Choosing floor and wall tiles for a home in Pakenham 3810: material, size, slip and finish.
Illustrative image, not a completed customer project.
Choosing tiles is easier when you start with the room and how it is used, rather than with a showroom display. A tile that looks right on a sample board may be too slippery for a shower floor, too fragile for a garage, or too large for a small bathroom. This guide covers the questions to ask before you commit to a tile.
It is general information for homeowners around Pakenham and nearby suburbs. The tile supplier and tiler should confirm that a particular tile suits your room. When you have a shortlist, send your tiling enquiry and up to three independent local businesses can advise and quote.
What are the main tile materials?
| Material | General characteristics |
|---|---|
| Porcelain | Dense, low water absorption; suits floors, walls, wet areas and many outdoor uses |
| Ceramic | Usually softer and more absorbent than porcelain; common on walls and light-use floors |
| Natural stone | Unique look; often needs sealing and specific care; can be heavy |
| Glass and mosaic | Used for features and splashbacks; needs suitable adhesive |
| Terrazzo and engineered stone tiles | Varied looks; check maker’s guidance on use and care |
Ask the supplier for the technical data sheet for any tile you are considering. It usually lists water absorption, recommended uses and, for floor tiles, slip resistance ratings.
Slip resistance
Slip resistance matters most on floors that get wet: shower floors, bathroom floors, laundries, entries, alfresco areas and pool surrounds. Tiles are tested and given slip ratings under Australian standards. Wet barefoot areas and outdoor areas usually call for a higher rating than a dry indoor living room.
Ask the supplier:
- What slip rating does the tile have, and under which test?
- Is it suitable for wet indoor floors, outdoor use or only dry areas?
- Does the textured surface make it harder to clean?
Building requirements for slip resistance can apply in some areas. Ask the tiler or building surveyor whether any apply to your project, rather than relying on a showroom label. Our outdoor tiling page covers outdoor tile choice in more detail.
Size and format
Tile size affects the look, the number of grout lines, the amount of cutting and the preparation needed.
- Small tiles and mosaics suit shower floors with falls, curved areas and features.
- Medium tiles suit most bathrooms, laundries and splashbacks.
- Large format tiles give fewer grout lines but need a very flat base and careful handling.
- Long plank tiles give a timber look but can show uneven edges if the base or tile is not flat.
In a small bathroom, a large tile can leave awkward cuts at walls and fixtures. Our tile layout planning page explains how size and set-out interact.
Edge type: rectified or pressed
Rectified tiles have edges ground after firing, giving precise sizes and allowing narrow grout joints. Pressed or cushion-edge tiles have slightly rounded edges and size variation, so they usually need wider joints. Neither is better in every case. Ask the tiler which joint width suits the tile you choose.
Surface finish
Tiles come in matt, satin, gloss, textured and structured finishes.
| Finish | Points to consider |
|---|---|
| Gloss | Bright and easy to wipe; can be slippery when wet on floors; shows water marks |
| Matt | Hides marks well; may hold dirt in textured versions |
| Textured or structured | Better grip; harder to clean |
| Polished | Shiny on floors; check slip rating carefully |
A gloss wall tile and a matt floor tile is a common combination in bathrooms.
Colour and batch
Tiles are made in batches, and colour can vary between batches. Buy all tiles for a job from the same batch and check the box labels. Some tiles have deliberate variation from tile to tile, called shade variation. Ask to see several tiles, or photos of a laid area, before deciding.
Order enough for the job plus waste and spares. Keep the spares and a box label for future repairs. Our tile repairs page explains why matching later can be difficult.
Choosing by room
What suits a bathroom?
Bathroom floors need slip resistance suited to wet bare feet, especially in the shower. Walls can take a wider range of tiles. Smaller tiles on the shower floor help follow falls to the waste. Our bathroom tiling page covers bathroom-specific questions.
What suits a kitchen splashback?
Splashbacks need tiles that clean easily and handle heat near a cooktop. Gloss and glass tiles are common. Consider how the tile meets the benchtop, window reveals and power points. Our kitchen splashback page has more detail.
Laundries
Laundry floors take water, detergent and heavy appliances. A durable porcelain floor tile with suitable slip resistance is common. See our laundry tiling page.
Living areas and hallways
Living floors take more foot traffic and furniture. Porcelain is common. Larger formats suit open spaces. Think about how the tiled floor meets carpet or timber in other rooms. Our floor and wall tiling page covers these areas.
Outdoor areas
Alfresco, porch and pool areas need tiles rated for outdoor use, with suitable slip resistance and frost resistance where relevant. Outdoor tiles also need the right base, drainage and movement joints.
Garages, rumpus rooms and entries
Garage floors take vehicle weight, hot tyres, oil and chemicals. Not every tile suits a garage. Ask the supplier whether the tile is rated for vehicle traffic and what adhesive and base it needs. Rumpus rooms and entries take heavy foot traffic and grit, so a durable porcelain with a forgiving colour suits many homes.
Underfloor heating
Electric or hydronic underfloor heating is sometimes installed under bathroom tiles. Most porcelain and ceramic tiles can be used over heating, but the adhesive and installation need to suit the system. Heating is installed before tiling and needs an electrician or heating installer. Plan it at the design stage, not after the tiles are chosen.
Cleaning and maintenance
Some tiles are much easier to live with than others. Before choosing, think about:
- Texture: textured tiles grip better but hold dirt.
- Colour: very dark or very light floors show dust and marks.
- Grout colour: light grout on floors can stain.
- Sealing: natural stone and some unglazed tiles need sealing.
- Water marks: dark gloss tiles in showers show soap and water spots.
Ask the supplier for the care instructions before buying, and check that the recommended cleaners suit your household.
Budget and value
Tile prices vary widely, and the tile is only part of the cost. Preparation, waterproofing, adhesive, labour and trims often make up most of a tiling job. A more expensive tile in a simple layout can cost less overall than a cheaper tile in a complex pattern. We do not publish prices; ask each tiler to quote the same tile and layout so you can compare.
Seeing tiles in your own light
Showroom lighting is bright and even. Your bathroom may have one window and a single ceiling light. Take samples home and look at them on the floor or wall where they will go, in daylight and at night. Look at several tiles together, not just one, to see the variation.
Grout and sealant choices
Grout colour affects the finished look as much as the tile. Cementitious grouts are common; epoxy grouts are more stain resistant but harder to apply. Movement joints at corners and changes in surface use flexible sealant. Ask the tiler which grout it proposes, and choose a colour against the actual tile.
Natural stone
Natural stone tiles vary in colour, veining and porosity. Many need sealing before and after grouting, and regular resealing. Some stones are sensitive to acidic cleaners and can etch. Ask the supplier for care instructions and whether the stone suits the room you have in mind.
Feature tiles and patterns
Feature tiles, such as patterned encaustic-look tiles, handmade-look tiles or coloured mosaics, can lift a plain room. Use them where they will be seen and where the layout suits them, such as a shower back wall, a niche, a splashback or a laundry floor. Patterned floor tiles need careful set-out so the pattern is centred and cuts are balanced. Some handmade-look tiles have deliberate variation in size and edge, which affects grout width. Ask the tiler how it would lay the feature tile you like.
Tiles for children, older people and pets
Households with young children, older people or dogs often need floors that are forgiving. A matt or textured floor tile with a good slip rating suits bathrooms and entries. Mid-tone colours and patterned tiles hide dirt and paw prints. Avoid polished floors in areas that get wet. If someone uses a walking frame or wheelchair, discuss level transitions and smooth but slip-resistant surfaces with the tiler.
Bringing it together
Before you buy, check:
- The tile suits the room and its water exposure.
- The slip rating suits the floor.
- The size suits the room and layout.
- The base can be prepared to the flatness the tile needs.
- You have enough from the same batch, plus spares.
- You have chosen grout and trims to suit.
Our tiling quote checklist helps compare quotes once the tile is chosen.
Sending your enquiry
Use the enquiry form with the room, the tiles you are considering and any plans or photos. Businesses can then confirm suitability and quote.
Yes Right Pty Ltd operates this referral website and may receive a fee from the businesses it introduces. It does not sell tiles. The tiler or supplier you choose confirms product suitability and price directly with you. Local notes are on our Officer page.